↓
 

A bicycle ride across the Americas

from Deadhorse (SCC) to Ushuaia (USH)

  • Home
  • Plan
  • Blog
  • Photos
  • FAQ
    • Why?
    • Where?
    • What next?
  • Map
  • Equipment
  • Calendar
  • Countries
    • USA
      • Alaska
      • Montana
      • Wyoming
      • Colorado
      • New Mexico
      • Arizona
      • California
      • Texas
    • Canada
    • Mexico
    • Guatemala
    • Honduras
    • Nicaragua
    • Costa Rica
    • Panama
    • Colombia
    • Ecuador
    • Peru
    • Bolivia
    • Chile
    • Argentina
  • Weather
  • Links
  • Contact
Home→Author mev - Page 30 << 1 2 … 28 29 30 31 32 33 34 >>

Author Archives: mev

Post navigation

← Older posts
Newer posts →

Tete Jaune Junction, new bike but unloaded

A bicycle ride across the Americas Posted on 2016-08-12 by mev2016-08-12

aIMGP3313
My bicycle for the day (cat not included). My plan has been to shift from touring bicycle to mountain bike for the Great Divide. Looks like a four-part transition:

  • Prince George (and before) to Purden Lake on touring bike, loaded
  • Purden Lake to McBride on touring bike, unloaded
  • McBridge to Tete Jaune Junction on mountain bike, unloaded
  • Tete Jaune Junction to Jasper (and beyond) on mountain bike, loaded

Today was third in that sequence as I put together my mountain bike and Bert helped by SAG some pieces as well as then meeting me for part of the ride.

McBride was small town yesterday – we found all the restaurants except the Chinese as well as discovered the grocery store closed at six. Not to worry as we picked up a few things before leaving. It was a short ride today and I put together my bike to ride the 63km and Bert drove to end point and cycled back to meet me.
IMGP3312
Touring bike and some panniers and other items back in Bert’s car.

The valley was pretty flat and not much climbing today. Also started seeing some higher peaks along the way. Part way along met with Bert and got a photo and nearby rest area where you can see some, but not most dramatic peaks behind.
IMGP3317
After that a fairly quick ride to the motel at the junction here.

A few items discovered in past few days that cause some adjustments to the plan.

  • I opened the box for the bike trailer and it was missing a key component: a hitch that connects the trailer to the bike. My mountain bike has a back rack and I’m able to condense everything into two panniers on the back, so can still proceed from here but will do this without the trailer. Meanwhile, I’ve ordered a new hitch. Not quite sure how that happened and will also check with the company.
  • Tomorrow night (Saturday) we learned every campground and hotel we could find on internet was taken in Jasper. Apparently, the little town in the park can fill up on weekends in peak season. Hence, tomorrow will make a rest day here – and meanwhile made a reservation in Jasper for next night as well as some further reservations beyond in Jasper and Banff. Doesn’t let me go “day to day” quite as easily, but just comes with visiting a very popular park

Meanwhile it also lets me try to figure out a key question…why is Tete Jaune, the small village, given the French name, but Yellowhead, the highway given the English translation?

Posted in British Columbia, Canada

McBride

A bicycle ride across the Americas Posted on 2016-08-11 by mev2016-08-11

IMG_20160811_113837
Two days cycling brought me to McBride. I met my brother Bert at end of first day and hence cycled w/o gear on the second day.
IMGP3291
First day was only 63km but with full gear. At 3km I crossed the bridge over Fraser River and started a gradual climb. There was a “no hitchhiking” sign on other side followed by a correctional institute. At 6km was a Petro Canada station and last chance to get a few things before sign below –
IMGP3293
The Yellowhead had good shoulders all the way to McBride and less traffic than I had seen west of Prince George. As I left town I came past several cross country ski areas as well as some local hiking trails.
IMGP3294
I stopped at a rest area by the Willow River and also found a monument to eight teens who had lost their lives in a canoeing accident.
IMGP3295
After this mostly rolling terrain as well as some signs warning of wildlife, though I didn’t see much wildlife.
IMGP3296
At 63km was Purden Lake Resort. Even before I got there they had put up signs taunting “homemade bread”, “pie”, etc. However, the cafe is only open Thursday to Sunday so everything was closed. I was able to get a camp site right next to the lake.
IMGP3298
This resort appears to cater to those from Prince George (45 minutes away, everything seems to get described in minutes) – some of whom put together semi-permanent looking RVs with balconies, sheds, etc and then have a place in the country to visit or even live.

In afternoon, Bert came by. Appreciate his driving all this way with my mountain bike so we can do the swap from touring bike to mountain bike. Below are two photos of my bike on the second day. The “before” shot –
IMGP3300
and the “after shot”
IMGP3302
Yup, with Bert’s SAG help, I could ride without my gear for a day. Bert drove a ways with the car, cycled back to meet me and then we cycled a bit further before he went back to the car. Much appreciated.

It wasn’t very cold overnight and next morning I was on the road shortly past 7am. It was nice cycling without my extra gear and I made it 47km before I met Bert coming back the other way. On the way were some short hiking trails such as the one below.
IMGP3303
We met at a nice rest area at Slim Creek where they had also decorated one of the bear proof containers.
IMGP3304
After that there the route had a good share of hills. Also some more distance scenery.
IMGP3308
It was a somewhat longer ride, 147km total and this brought me to small town of McBride. Seems to be a bit of a ranching town.
IMGP3310
It was nice to finally see the services sign.

Tomorrow expect a shorter ride and also a chance to try my mountain bike riding from here (unloaded). After that will be loaded again…

Posted in British Columbia, Canada | Tagged Bert, unloaded

Prince George, into the big city

A bicycle ride across the Americas Posted on 2016-08-09 by mev2016-08-09

I have come through approximately a dozen towns in the past fifty days that are large enough for a grocery store: Fairbanks, Delta Junction, Tok, Haines Junction*, Whitehorse, Teslin, Watson Lake, Dease Lake, Smithers, Burns Lake, Vanderhoof and Prince George. However, the population of Prince George (~71,000) is about equal to the population of the other eleven towns combined. Counting grocery stores is subjective to figure out the boundary between large convenience store (Otter Falls?) and really small grocery (Haines Junction) but close enough for this calculation.
IMGP3280
Today the road was surprisingly busy – particularly with log trucks and large double long “Ledak” trucks that smelled like cut timber. I’ve browsed other journals to get an idea of road conditions and other travelers have complained about lack of shoulders and heavy logging traffic – so I kept track. Approximately 25km of the route today didn’t have shoulders – so required extra concentration. Only one instance where an oncoming truck making an unwise pass forced me off the road, but needed to watch more closely today.

It was occasionally raining when I left Vanderhoof. Climbed up out of the town and then mostly ups and downs after that. I was trying to figure out where all the log trucks were going, particularly with a big mill in Vanderhoof and apparently they pretty much continued all the way to Prince George. The first 23km had a reasonable shoulder.
IMGP3282
At 23km my nice shoulder went away. Ten kilometers further was Brookside RV park with small store. Stopped here and had a second breakfast (Bednesti resort near 47km was closed). Also saw some of these large trucks parked, so somewhere up here they are putting large wind turbines.

After breakfast some more “no shoulder” riding and some up and down hills. Before 50km, the shoulder reappeared and was there for rest of the day.
IMGP3286
However, counted in that was a short section shown above where traffic designers decided to put in both a rumble strip and grates in side of the road. Pretty sure that designer wasn’t a cyclist. Fortunately, it was only a short stretch and I could ride to left of the rumble strips to avoid the mess.

At 75km was a steep descent to Chilako River followed by a “chain up” area and then another climb. Not much later was a Petro Canada gas station/store at 82km and chance to refuel and take a break.
IMGP3287
After this as sign above shows, it was more downhill than uphill. At 90km the road became four lanes and had some good descents coming down into Prince George. Traffic also got quite a bit busier.
IMGP3288
Prince George bills itself as “BC’s Northern Capital”.
aIMGP3290
One of the last downhills into town. I passed the major intersection of Yellowhead (#16) and Highway 97 and then not much later came into city center with grid of streets. Found a motel downtown and happy to get to the big city.

After today, expect a transition of sorts. My original plan has a Phase 1 on touring bike followed by a Phase 2 on mountain bike. My brother Bert is kind enough to bring up the mountain bike and help make the swap. We’re doing this in next few days and Bert will join me for a few days and after that Bert will leave with touring bike.

Posted in British Columbia, Canada | Tagged logging trucks, shoulders

Vanderhoof

A bicycle ride across the Americas Posted on 2016-08-08 by mev2016-08-08

A shorter ride that wasn’t too difficult.
aIMGP3276
Landscape was flatter today with a lot of flat straight segments through the forest. There were two climbs today when I shifted back into granny gear and rest was zipping along in mid-range gears.
IMGP3275
They are busy “crack patching” in the section between Frasier Lake and Fort Frasier. The first 20km the shoulder had a lot of segments like above where they’ve put tar to seal the crack and then a generous amount of gravel on top. On the primary driving surface the gravel quickly goes away but sometimes had a few bumps on the shoulder. Enough log trucks and other traffic that I was mostly on the shoulder.

Stopped briefly at 21km in Fort Frasier at local store here. Also signs indicating the “last spike” of the Grand Trunk Pacific railway was placed here.

After that a climb coming out of Fort Frasier and then mostly flat. The road had long straight sections and hills only came when this cross-route cut across some roads.
IMGP3277
Claim to fame for Vanderhoof is that it is “geographic center of British Columbia”. A nice visitor center coming into town along with a museum (closed for the summer). A few motels and nice small downtown street. Also a grocery store. Otherwise, I was in town by mid-day and took and easy afternoon – since do not expect much between here and Prince George (PG). With a population of 71,000 PG has more people than any town I’ve been through so far.

One sobering note in the afternoon I noticed the street in front of the motel was very quiet. Thought it might be the road construction/paint striping going on, but discovered ~4pm there was collision between motorcyclist and jeep. Police had closed off the street before doing careful forensics on the crash and street was still closed several hours later. Motorcycle was type with large “panniers” so likely a traveler. Can’t be too careful.

Posted in British Columbia, Canada

Frasier Lake

A bicycle ride across the Americas Posted on 2016-08-07 by mev2016-08-07

The terrain today was a little flatter. Today a slightly longer ride both in terms of distance and time.
IMGP3264
The first ten kilometers started with a climb up to the top of Six Mile Summit. Here you can see the final approach on the hill. It was only ~3km but got a bit steep towards the end. There was a chain up area at the bottom and a chains off at the top. Nice to get that out of the way at start of the day.
IMGP3265
Here is the top of Six Mile Summit.

In the rest of the day there were two or three short steep hills but overall the land was becoming a bit flatter and there were also long stretches of flat land.
IMGP3267
Some areas of agriculture such as these with large hay rolls.

Once I crossed Six Mile Hill the rest of the ride into Burns Lake at 52km went fairly quickly. Signs indicated there was repaving and I saw some newly paved pieces but fortunately no construction on Sunday. Once in Burns Lake, I met up with Jared Lester. Jared is working in town for BC Wildfire Service – as a summer job before he goes back to school in the fall. We both cycled TDA in 2013, though Jared was a stronger/faster cyclist and was able to ride every inch of the designated route. He was 18 then and youngest rider in TDA 2013. Nice catching up with him.
IMGP3268
I call this a “joint mug shot”, taken by convenience store clerk, though we’re both smiling.

After that got some lunch and then headed out. There weren’t too many places to stop very nearby, but figured I wanted to at least get close enough to Vanderhoof that I could reach it the next day. The route went up and down past the lake but continued to be somewhat flatter than previous days. The travel lane was nice and smooth and sometimes the chip seal shoulder was extremely rough – hence I alternated between riding in the shoulder and on the white stripe.
IMGP3270
One rest area had this cairn with an inscription (below) that suggested the main stone had once been part of the castle where King Arthur was born. If so, who and why was motivated to bring that stone here to middle of BC?
IMGP3269
Here is another small lake. The signs indicate “Lakes District” and there are several larger lakes out here as well.
IMGP3273
At 108km was Endako where the only business was this roadhouse. Just the right time and place to have an early dinner here. At 108km, I hemmed and hawed about stopping here and renting a room upstairs. Finally decided to go just a little further and cycled to Frasier Lake at 121km to end the day.

Posted in British Columbia, Canada | Tagged Jared, Six Mile Summit

Topley

A bicycle ride across the Americas Posted on 2016-08-06 by mev2016-08-06

Nice to be on the road again after a week in Smithers.
aIMGP3258
Fewer big peaks to pass by today as the landscape flattened out some. However, still some hills to climb up and over as the road mostly followed the Bulkley Valley.
IMGP3253
Foggy in the morning as I started out. The road sign gives a good idea of the overall agenda: Houston for lunch, Topley as destination and Prince George in a few days. The bike rode well and even “clicked” as the spring forced the new pawls out. I could definitely notice the difference and had no skip issues today.
IMGP3254
Photo above shows some of the sometimes large things that are moved on the road. Something this big has a pilot car, but things only somewhat smaller pass with mostly just a “wide load” sign. Fortunately, a reasonable shoulder on the Yellowhead Highway and traffic is also considerate.
IMGP3255
At 15km was Telwaka and shortly after that was what looked like some cabins with the following sign out front. Of course had to get a photo of this which is second time I’ve seen a bicycle-specific welcome sign (the first was on Cassiar Highway before Irkut but it was cold and rainy and I was concentrating on keeping warm).
IMGP3257
Also not too far from Telwaka was a rest area that had some signs including this one about an overland telegraph. It surprised me that bridging the Pacific would somehow be seen as easier than bridging the Atlantic. However, also gave good idea of importance of telegraph lines a little over a century ago – perhaps equivalent of “fiber” today.
IMGP3259
Close to 25km it began to rain for a while. The road also had a few hills to climb over. Fortunately, it was mostly done by 35km when I caught this cyclist coming down the hill. He was headed to Juneau. I asked about hills and he indicated the one he had come down was the largest. Shortly thereafter was a somewhat steep ~3km and then flatter ~5km to reach top of Hungry Hill.
IMGP3260
After climbing the hill a good descent back to the Bulkley River and I was nearing Houston. The road shoulder had some more debris, particularly rocks and parts of logs – but was mostly still rideable. Without too much difficulty made it to Houston for lunch.
IMGP3261
A claim to fame for Houston is the “World’s largest fly rod” as shown here outside the visitor center. The power was out so one restaurant was closed but Subway was able to make sandwiches. Had a sandwich and took a leisurely lunch before getting back on the road.
IMGP3263
Passed kilometer post 420 (no sign) and then 421 (sign), on a road that normally places signs every 5km. The last 30km was mostly flat with a slight uphill grade as the road followed the drainage uphill.

At 93km was turnoff to Granisle and a store, motel and closed restaurant. I didn’t expect much in next 50km until Burns Lake so figured it was good place to stop for the day.

Posted in British Columbia, Canada | Tagged fly rod, telegraph

Smithers, hub fixed

A bicycle ride across the Americas Posted on 2016-08-05 by mev2016-08-05

Hooray, my bike is ready to go again.

I had been checking the UPS tracking numbers and was getting a bit concerned that by middle of the day, the last status was still “arrived in Prince George”. Hence, decided to stop by McBike just in case and was pleasantly surprised to discover the hub parts had been delivered in the morning. They were almost done with the bike since I had also asked for replacing worn cassette and chain as well.

I just picked things up and the bike rides well and appreciate Phil Wood for sending up the parts under warranty and McBike for their work in getting me going again.

Below is an image of the broken hub part to briefly describe what failed. The end view shows five pawls that normally stick out one direction engage in a ratchet wheel to drive the hub forward. When one spins the other direction, these pawls stay pushed in to let the hub spin freely.

The problem was that the pawls were getting stuck in the “disengage” level and the hub was spinning freely in both directions. Not particularly useful when you want the hub to engage and let you drive forward. When the chain “skipped forward” perhaps one pawl was missed and when it rotated freely all pawls were missed.

The second picture gives an end view including the spring that sits in middle of the pawls and provides pressure to help keep the pawls popped out so they will engage.

What appears to have failed is a combination of the spring no longer pushing the pawls back out and the pawls themselves getting stuck in off position. Perhaps one contributing factor was the grease getting dirty/contaminated so providing extra help in keeping the pawls stuck. Phil Woods send an extra version of the freehub body as well as some grease, instructions. In addition since we weren’t 100% certain if I had a four-pawl or five-pawl hub, they sent some extra pawls. The replacement pieces were sufficient for mechanic to fix things.
IMGP3252
IMGP3251
One thing I’m thinking in future is carrying an extra freehub overhaul kit as well as perhaps learning a bit more on taking hubs apart to put in fresh grease.

In any case, happy to have things fixed and be ready to ride again.

Posted in British Columbia, Canada | Tagged hub, pawl

Hanging out in Smithers

A bicycle ride across the Americas Posted on 2016-08-04 by mev2016-08-04

Tired of seeing Smithers photos? I’m not quite tired of taking them, though will be happy once I’m on the road again.

I’ve had a quiet past several days and also have done some exploring of the area. Right at start of Monday morning I called Phil Wood service and had a ~20 minute conversation with Leroy about the broken hub. As part of that call and several follow up emails back and forth, the plan emerged. Phil Wood has sent the replacement hub parts (under warranty, thank you) via UPS and now the waiting is for an expected Friday end-of-business delivery. The latest tracking shows the package has reached Prince George, ~375km from here. Hopefully all is well and McBike gets it installed and I’m able to depart on Saturday, also on my way to Prince George.
DSCF1251
On both Tuesday and Thursday, I rented a mountain bike. On Wednesday, I did more walking around town.

I traveled north to point where the hub failed and then cycled my way back, partially so I could see the missing section but more from my bike. I also stopped by the Lesters. That takes some explaining: in 2013, I cycled Tour D’Afrique across Africa along with Jared Lester and ~50 other people. Jared is a strong cyclist, a real nice guy, and at 18 was youngest cyclist on the trip. However, he works for BC Wildfire service and hence wasn’t in town. Jared had volunteered his families assistance if needed. I didn’t need, but instead just made a courtesy visit while I was here. I had met his parents when they came to Capetown at finish of TDA. Still hope can intersect with Jared either later or during my travels from here to Prince George.
DSCF1259
Here is a photo of Smithers Main Street, this time with the flag of Poland and of the Netherlands. They had a number of other flags displayed this day as well.
DSCF1260
Here is the mountain bike I rented. Nice 29er, full suspension bike. I also rode up to the trailhead for Twin Falls, a local recreation site just north of town. The road to Twin Falls gets slightly steep at the end and then there is a short trail to a viewing platform.
DSCF1263
Here are the twin falls from the viewing platform. Note that they aren’t quite identical twins since the water from the left fall seems much more than from the right.
DSCF1264
A number of businesses of which this one struck me as a typical one catering to those traveling with RV. A combination of large RV-sized car wash, showers and laundromat. Before leaving will stop by laundromat again and make sure everything is clean.
DSCF1267
One nice part of Smithers is the “perimeter trail” a mostly connected set of paths through the woods that can be followed to ride around Smithers. Some are nice forest paths like this one, some are rough rocky paths, one section was closed and some sections are on-street bike paths. However, get a sense of Smithers as being bike friendly with racks placed downtown and facilities like these paths.
DSCF1265
I’ve stayed in motel, but there is also a nice community campground down by the river.
DSCF1266
Photo of the Bulkey River, not far from that campground.

Overall, have gotten a chance to get out most days and even do some cycling with a rented mountain bike. All this while occasionally checking the delivery status as the package slowly made its way north. Hopefully tomorrow the package arrives and then we see about getting things fixed and moving further again.

Posted in British Columbia, Canada

Smithers, weekend update

A bicycle ride across the Americas Posted on 2016-08-01 by mev2016-08-02

Quiet weekend in Smithers. Talked with Phil Wood this morning (Monday) and they are investigating possibilities. Will update below about the hub as I know more. Today is British Columbia day, a public holiday with shops closed – so seeing what sorts out before going to McBike and Sports tomorrow on whether to take Plan A (fix existing hub) or Plan B (build replacement 36-spoke wheel).

UPDATE: Thanks to Phil Wood, they have sent a hub cassette here to Smithers. I have a UPS tracking number and an expected Friday delivery. Hopefully McBike can get things installed and after that I’ll be back on the road again. A bit of delay, though Smithers is a nice place to have that delay. Will look for different items here including perhaps renting a mountain bike and riding back to cover the missing 17km link.

A relaxing weekend and if I have to be stopped, then Smithers is a rather nice town to wait. I am two blocks off the main street with little shops. Below are some more photos of the town. Of course at some point frustrating to not be able to proceed, but have to give things time to sort out.
aIMGP3241
Here is the alpenhorn guy at entrance to Main Street. Smithers is in a valley with some tall peaks to the west and some shops on Main have an alpine theme.
IMGP3236
Tim Hortons, Canadian Tire, laundromat, McDonalds, traffic lights, etc. This is largest town since Whitehorse.
IMGP3237
McBike and Sport. A pretty complete and full-sized bike shop. Have my bike there for a tuneup and to help replace the hub.
IMGP3238
Town library at end of Main with mountains in the background.
IMGP3240
Mural describing the months of the year from perspective of Smithers.
IMGP3242
Saturday morning is farmers market. By far the longest line was for a bakery with good bread and other goods.
IMGP3245
Local coffee place that opens early.
DSCF1251
Local scenery. Look close and you can see the train.

Posted in British Columbia, Canada

Smithers, finished the Cassiar and started the Yellowhead

A bicycle ride across the Americas Posted on 2016-07-29 by mev2016-07-29

After five days of cycling along the Cassiar and one day cycling the Yellowhead, I am now in Smithers. Little to no working wifi connections have caused this to be collected together in one post, so I’ve labeled them by day.

Tatogga to Bob Quinn (day 1)
Sometimes paying attention to the weather forecast can be a bad thing, particularly when you can’t do much about it. It rained overnight at Tatogga Lodge but was dry by morning. Internet weather forecast was for 15-25 km/h from the SSW or in other words headwinds. For several days following it was 10-15 km/h from the SSW, hence first day was strongest but headwinds for foreseeable future. I figured I would split the 141km to next point of civilization (Bell2) into two days.
IMGP3144
Breakfast didn’t start until 8am and things were pretty relaxed. Very friendly and nice service, just not the quickest. Started with bowl of yogurt and then an omelet. When they said, “we don’t have hashbrowns, how about a small pancake instead”. I replied with how about two? Unfortunately, my eyes were bigger than my stomach and I ended up with extra container to carry those two large pancakes.

The wind was already going when I started. Undoubtedly some psychology and some hindrance, but I was slow going. At 25km, I came across a nice (and recommended) provincial park, Kinesaw but it was too early to stop yet. There was a rest area with pit toilets at Eastman at 47km where I had lunch including those extra pancakes. Mmmm…
IMGP3147
I had lunch at same table with two couples traveling in campers. The wind blew the tablecloth every which way. I looked around see see how suitable Eastman might be as a camp site: good clean water – check; nice spots to camp? – sortof; far enough in the distance – not quite since that meant 94km the next day. So after some hemming and hawing, set out on the road again.
IMGP3149
There was reasonable descent and climb down the Burrage river and then back on the other side. At this point I had 60km done and figured I would stop and the next nice stream I found. Unfortunately, none of the streams were particularly suitable. First one had a high bridge and water way down 20-30m below and not an easy way to get to it; next one didn’t really have good camp sites. I was picky but also kept going. Fortunately at some point the wind was also less.
IMGP3152
Above is example of the “Devil Creek”, though the name should have been a giveaway as being a raging torrent.
IMGP3153
Finally as I got close, the Bob Quinn Rest area at 94km was a pretty nice spot. There was small creek less than a km away and a picnic table, pit toilets and bear proof litter barrels. Turns out there were two other campers there as well. One in a large RV and one in a smaller camper. The large RV had slogan below, which I thought was cute. Perhaps see if I can get similar sign for my tent?
IMGP3156

Bob Quinn to Bell2 (day 2)
Not much wind overnight and fortunately mostly calm when I awoke. Despite forecasts, wind was not a big deal today and it was otherwise a short ride of only 47km.
IMGP3157
These folks from Connecticut wanted a photo, so I got one of them as well. They also told me there was a large cycling group “from Houston” they had seen earlier. I thought it might be Texas 4000 but wasn’t sure.
IMGP3158
The gates above are “avalanche gates” so the road can be blocked in winter if an avalanche has blocked the route. Today I saw several avalanche chutes as I slowly climbed up to and then over a low summit.
IMGP3159
Along the way was this sign describing an earlier telegraph line from ~1900. Pretty amazing thinking of maintaining a telegraph line through some pretty rugged countryside.
IMGP3160
Nowadays the new line being put in is a high voltage electric transmission line started in 2012. It hasn’t yet reached Dease Lake but definitely has come this far.

Some somewhat slow but beautiful climbing brought me to the local water divide shown below.
IMGP3161
There wasn’t a huge downhill but did stop by a rest area on way down where the plaque below explained more about the avalanches as well as the pass.
IMGP3163
When I was about 41km along, I saw six riders coming the other way (two are hidden behind others in photo below)
IMGP3165a
I held out my hand with thumb and pinkie extended and yelled “Go Horns!” I got a similar response which confirmed to me that this was Texas 4000. As I learned later, this group of six riders had decided to make a “challenge day” by riding from Meziadin Junction to Dease Lake, a distance just slightly over 200 miles. Wow!
IMGP3166
Without much difficulty, I found myself at Bell2 Lodge. A fairly nice, upscale but also expensive lodge. I was still early and had lunch and then reserved a tent camp site ($25 Canadian compared to $0 at Bob Quinn, though it did include a shower).
IMGP3174
Later in afternoon, four other touring cyclists arrived including Mark and Hana, from New Zealand traveling for two years from Prudhoe Bay southbound; Rick from the Netherlands traveling for a year from Prudhoe Bay to Panama City and a Canadian cyclist going from Whitehorse to Calgary.
IMGP3175
Also arrived was rest of Texas 4000 group.
IMGP3176
It was fun connecting with other cyclists. Later in afternoon, Mark, Hana and Rick cycled a little further down the road to camp and rest of us enjoyed Bell2.

Thought the photo below was amusing, though not sure if it would be allowed in North Carolina.
IMGP3179

Bell2 to Meziadin Junction (day 3)
Breakfast brunch with Texas 4000 before setting off down the road to Meziadin Junction.
IMGP3180
Today started as somewhat easier cycling as the first 60km mostly followed the Bell-Irving River though with some climbs up and down along the way. There tended to me more descents than climbs.
IMGP3182
I did see a bear in the distance, but he had almost scampered off the road before I could get a photo.
IMGP3184
I stopped to take a photo of the wooden bridge decking that is found on some of the bridges and the Canadian cyclist just happened to come along. We had a brief snack break before he went ahead.
IMGP3185a
Not much later, I came much closer to a bear. The bear above was busy munching on clover just on the other side of the highway as I rolled up. I made some noises to see if he noticed me. He (she?) looked up and decided the clover was much more interesting. So I carefully cycled past just a road distance apart.

At 60km, the road crossed the Bell Irving River. Somewhat of a surprise but the last third of the ride had a rather long 12km hill to climb first along with some climb/descent as it went up and over some drainages. Definitely a bit tougher riding in the afternoon. However, without too much difficulty, I was at Meziadin Junction. I stayed at the campground, 1.5km past the junction, but did come back for dinner at the work camp.
IMGP3189
The work camp was definitely an industrial type setting with large trailer building under separate roofs.
IMGP3190
At dinner I was with several log truck drivers. They had passed us cyclists most the the day and hence I was able to figure more out about their operations:

  • The mill was in Stewart, ~60km from Meziadin Junction and at sea level. Apparently, the finished product goes out by sea
  • The logging areas are near Bob Quinn, so each truck driver does ~200km one way or ~400km driving for a single load of logs. They make two runs per shift
  • There were six truck drivers total

Otherwise the work camp had a cafeteria that made a standard fare each day. This night was turkey with the trimmings and was pretty good. After dinner went back to the campground. Paid for wifi but couldn’t connect, except later in middle of the night.

Meziadin Junction to Bonus Lake (day 4)
IMGP3195
Total of 156km left on the Cassiar, so decided to split this into two days. While the truck drivers from previous night were further north, I did still have some log trucks passing, until I came past the following lot where they were loading up these trucks.
IMGP3197
Along the way, I came along these locals who were riding from Houston, BC to Stewart
IMGP3199
It was otherwise a reasonably relaxed day with fewer hills than previously. Given the bears I had seen, I wanted to avoid some of the rivers (with salmon spawn) and had found this nice site by a lake known as “Bonus Lake”
IMGP3202
The one thing I did discover was a water filter was more important for still water like lakes than flowing water from streams as just scooping water brought all sorts of little creatures swimming along.

Bonus Lake to Kitwanga (day 5)
I survived the lake bugs and today finished (except for 4km) the remainder of the Cassiar Highway. A few hills but less severe than further north.
IMGP3204
Initially I crossed Cranberry Bridge #2 and then Cranberry Bridge #1 at 18km. After the second bridge, the road was a rougher chip seal than before. Looking at the water stops including Moonlit Creek at 50km (posted no camping), I think Bonus Lake had been good spot to stop. At 56km was a sign to Gitanyow,
IMGP3208
a small first nations settlement. Good spot for a lunch as well as looking at some fairly impressive totem poles.
IMGP3210IMGP3211IMGP3212
The other exit from Gitanyow was only 20km from end of the road. This passed fairly quickly and I reached Kitwanga the last settlement at end of the road.
IMGP3214
I took the bypass including coming through the old historic Battle Hill.
IMGP3215
The local RV park advertised wifi, so decided to stay there. Unfortunately, wifi didn’t work with a “data block” message. Apparently, some previous customers had used up all the monthly bandwidth allotment and so no more until the next month. RV park owner was a bit frustrated with customers that might use Netflix and similar apps since it could gobble everything up and leave her with frustrated customers.

Kitwanga to Smithers (day 6)
Started the day by cycling 4km to Petro Canada station in time for a 7am opening time for restaurant and breakfast.
IMGP3222
Reached end of the Cassiar!

There are normally three employees and by 7:15am, I was outside with the clerk and the waitress as well as a few customers. The cook had the keys and was late. However, things got unlocked and overall had a good breakfast before setting on the road.
IMGP3226
As a first impression, the Yellowhead Highway had wider shoulders but also more traffic. The route mostly followed the rivers but still had a moderate amount of climbing. Less of the short sharp climbs, but several longer climbs and then descents. Overall the bike was going well, though I noticed some occasional slips again.
IMGP3228
Seeley Lake looked like a nice campground and location.
After 48km, came down into New Hazelton and while still early, went for lunch. Notice below to see the first stop light I had seen since Whitehorse.
IMGP3230
Also the first chain restaurant.
IMGP3232
New Hazelton while not large was definitely a bit more civilization than anything since Watson Lake.
IMGP3235
Along this highway, there seemed to be some sort of anti-hitchhiking campaign.

After New Hazelton, a good 5km long climb and then more ups and downs. Started to pick up a better tailwind breeze. That was good from perspective of making it a bit easier, though it also increased the pings I got of being lightly loaded. Figured I could get this sorted out in Smithers when I reached there and brought things to a bike shop.

As detailed in post preceding this one, unfortunately my freehub gave out at 97km. I started walking and almost immediately, a pickup truck driver was kind enough to notice and bring me to local bike shop, McBike. So missed the last 17km of cycling into Smithers and will now need to sort out best way to get bike fixed and back on the road again. See preceding post for further details.

Posted in British Columbia, Canada

Post navigation

← Older posts
Newer posts →
©2025 - A bicycle ride across the Americas - Weaver Xtreme Theme
↑